L3 cache varies with CPU
Dual channel memory architecture
Support for DDR4 2666/2400/2133 MHz memory modules
Support for ECC Un
-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non
-ECC mode)
Support for non
-ECC Un
-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
* To support 2666 MHz or XMP memory, you must install an 8th Generation Intel® Core™ i7/i5 processor.
1 x D
-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
1 x DVI
-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI
-D port does not support D
-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz * Support for HDMI
1.4 version and HDCP
2.
2.
Support for up to 3 displays at the same time
Maximum shared memory of 1 GB
High Definition Audio
2/4/
5.1/
7.1
-channel
* To configure
7.1
-channel audio, you have to use an HD front panel audio module and enable the multi
-channel audio feature through the audio driver.
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x4 (PCIEX4)
2 x PCI Express x1 slots
(All of the PCI Express slots conform to PCI Express
3.0 standard.)
6 x SATA 6Gb/s connectors
* Refer to "1
-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
Intel® Optane™ Memory Ready
6 x USB
2.0/
1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
1 x 8
-pin ATX 12V power connector
1 x CPU fan header
1 x system fan header
1 x M.2 Socket 3 connector
6 x SATA 6Gb/s connectors
1 x front panel header
1 x front panel audio header
1 x USB
3.1 Gen 1 header
2 x USB
2.0/
1.1 headers
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC
-TPM
2.0_S module only)
1 x parallel port header
1 x serial port header
1 x Clear CMOS jumper
1 x D
-Sub port
1 x DVI
-D port
1 x HDMI port
4 x USB
3.1 Gen 1 ports
2 x USB
2.0/
1.1 ports
1 x RJ
-45 port
3 x audio jacks
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
Use of licensed AMI UEFI BIOS
PnP
1.0a, DMI
2.7, WfM
2.0, SM BIOS
2.7, ACPI
5.0
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
AutoGreen
Cloud Station
EasyTune
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
RGB Fusion
Smart Backup
Smart Keyboard
Smart TimeLock
Smart HUD
System Information Viewer
USB Blocker
V
-Tuner
Support for Q
-Flash
Support for Xpress Install